Tagged with TinyLoadr

“ArduinoISP Deluxe Shield” is now “TinyLoadr Shield”

When I made the first prototype for my ATtiny and ATmega programming shield, I decided to call it the ArduinoISP Deluxe Shield. “ArduinoISP” came from the fact that it would rely on the ArduinoISP sketch in order to be useful, and the “Deluxe” part was because while there were already other ATmega or ATtiny programming […]

Sneak peak: TinyLoadr Shield 3.0 prototype

Note: The ArduinoISP Deluxe Shield has a new name: TinyLoadr Shield! Read more about it here. I’ve been pretty busy lately, but one thing I’ve been playing with is an experimental new version of my ArduinoISP Deluxe TinyLoadr Shield. Here’s a sneak peak at the bare PCB. FYI, all of those traces are hand-routed. This is […]

Docs: How to use the TinyLoadr Shield

Note: The ArduinoISP Deluxe Shield has a new name: TinyLoadr Shield! Read more about it here. Introduction This tutorial will show you how to upload the Blink example sketch to an AVR microcontroller using the ArduinoISP Deluxe Shield TinyLoadr Shield.

Build Instructions: TinyLoadr Shield Kit

Note: The ArduinoISP Deluxe Shield has a new name: TinyLoadr Shield! Read more about it here. These are the build instructions for the ArduinoISP Deluxe TinyLoadr Shield kit. These instructions assume that the user has a basic knowledge of soldering. If you do not know how to solder, then check out this great guide by Sparkfun before continuing.